Jice High-Precision Environmental Control System UPECS: Creating a Stable Environment for Confocal Microscopy Systems
Release time:
2026-11-18
UPECS mitigates environmental interference in confocal systems, achieving system-level stability.
The resolution of a confocal microscope is determined not only by the objective lens and detector. Temperature fluctuations, air currents, micro‑vibrations, humidity changes, and cleanliness can all translate into focal‑plane drift, misalignment of the optical path, and signal noise. When the optical system has already achieved very high precision, but environmental control remains at the rudimentary level of room‑air conditioning, the system‑level goal of “ultimate stability” suffers from a critical shortcoming that is easily overlooked. The UPECS ultra‑precision environmental control system from Jice is designed to address this very shortcoming.
The environment is not a background condition; it is part of the optical system.
Confocal imaging is sensitive to mechanical displacement, and thermal effects are among the most persistent drivers of such displacement. Temperature variations cause the objective lens, scanning galvanometers, and supporting structures to thermally expand or contract, manifesting as focal plane drift and gradual misalignment of the optical path. This type of drift is typically not abrupt; rather, it is continuous, slow, and difficult to detect, and it can readily accumulate into systematic errors during long-term imaging, three-dimensional reconstruction, and quantitative analysis.
Humidity also plays a role: excessively high humidity can lead to condensation on optical surfaces, while excessively low humidity increases the risk of static electricity and indirectly affects the condition of optical interfaces. Cleanliness determines particulate contamination on optical surfaces, which is one source of scattering, background speckle, and reduced transmittance, and its effects are cumulative. As for micro‑vibrations, it goes without saying that confocal microscopy is sensitive to mechanical vibration; such vibrations cause scanning mirrors to deflect and produce periodic stripes in the images. The problem is that these variables are often addressed separately, passively, and with varying degrees of precision, lacking system‑level coordination.
The stage incubator only takes care of the sample—what about the entire confocal microscope?
When performing live-cell imaging, a stage-top incubator can provide the sample with stable temperature, humidity, and a controlled CO₂ microenvironment; however, its influence is limited to the immediate vicinity of the sample and does not extend to the objective lens, scanning galvanometers, lasers, detectors, or the metal frame and tube structure that support the entire optical path. These optical and mechanical components still undergo thermal expansion and contraction in response to ambient temperature fluctuations, gradually transmitting room‑temperature variations into focal‑plane shifts and misalignment of the optical system.
The traditional approach involves applying “patches” one by one: adding vibration isolation tables, equipping incubators, installing light shields, and fitting voltage stabilizers—each addressing a specific type of localized disturbance while lacking systemic coordination. The recirculating airflow of temperature-control equipment can itself introduce micro‑vibrations, and vibration isolation tables only mitigate ground‑borne vibrations, failing to prevent slow thermal conduction through metal structures caused by room‑temperature fluctuations. When subsystems operate independently under different environmental baselines without mutual coordination, long‑term system‑level stability becomes difficult to achieve.
UPECS’s positioning: to extract an independent environmental reference layer from the confocal system.
UPECS does not simply add another auxiliary device to the laboratory; rather, it establishes an independent “environmental baseline layer” for the confocal system, decoupling it from the room’s broader environmental conditions. It integrates the main equipment cabinet, intelligent control system, airflow circulation system, clean filtration system, heating/cooling system, and localized air‑bath module into a deeply interconnected whole, enabling multidimensional parameters—such as temperature, humidity, cleanliness, air pressure, micro‑vibrations, and electromagnetic shielding—to operate in concert under a unified control framework. Rather than requiring laboratory renovations, UPECS functions as a self-contained microenvironmental unit, isolating the area housing the confocal system from fluctuations affecting the rest of the lab and creating a locally stable zone.
Parameters
|
High-Precision Environmental Control System UPECS Capability
|
The significance of the confocal system
|
Temperature stability
|
Maximum ±0.002℃ (±2 mK), engineering delivery standard under continuous operating conditions
|
Suppress the temperature-induced disturbances at the focal plane to a level far below the typical fluctuations of a standard room air conditioner.
|
Humidity stability
|
Maximum ±0.1% RH
|
Reduce air refractive index disturbances, condensation risks, and electrostatic hazards.
|
Cleanliness
|
Highest ISO Class 1
|
Reducing the cumulative threat of particulate matter to precision optical surfaces
|
Micro-vibrations and Noise
|
Operating noise ≤45 dB, supports modular configuration with micro-vibration resistance
|
The system itself does not become a new source of vibration and can work in concert with the vibration isolation table.
|
Coordinated Control
|
Temperature, humidity, cleanliness, air pressure, micro-vibration, and electromagnetic shielding are interlinked within a single framework.
|
Avoid having each subsystem operate in isolation based on different environmental benchmarks.
|
Here is the title one h1 placeholder text
More news